Xhorse VVDI2 can’t identify BMW motorcycle keys solution

Xhorse BMW motorcycle obd key learning license for VVDI2 and VVDI Key Tool Plus has been available.

This function supports making BMW motorcycle keys without disassembling any tablet. In actual operation, one user has found identification problem when using VVDI2, here Xhorseshop.us will provide the solution for you, so that everyone can avoid it in the future.

Using VVDI2 to make a BMW motorcycle key requires unlocking the control unit (preprocessing) just like making a BMW car key.

The dealer key can only be generated for matching after the pre-processing and unlocking is completed.

Problem:

A user could not recognize and generate a key after using VVDI2 to unlock the control unit.

He repeatedly adjusted the position of the key and took out the circuit board, but still could not recognize the key.

However, the customer can read the chip type by using the chip identification function of Xhorse VVDI2. In this case, we need to enter the upper right corner of VVDI2 interface: Options–Settings, change the default value 0 to 1 and try again. This problem would not occur if the customer was operating on keytool plus.

Another thing to note is: same as making BMW key, you must back up the code before preprocessing the control unit, otherwise the code will be lost after the preprocessing and unlocking is completed.