New! Xhorse VVDI Frequency Tester V2 (XDRT20)

Xhorse VVDI Frequency Tester V2 (XDRT20) is a new remote tester that has been recently introduced by Xhorse. This advanced device supports multiple important frequency bands including 315MHz, 433MHz, 868MHz, and 902MHz, and also offers additional features like lMMO signal, doorknob signal detection, and IR testing. It provides improved capabilities and broader support compared with old remote tester.

For new users, here is a guide on how to use this new remote tester.

Opening the box and taking out the tester, which includes a specially designed lanyard featuring Xhorse logo.

This lanyard can be easily attached to the tester V2 for added convenience.

To power up the tester, you need to remove the cover at the back which reveals the battery compartment.

The tester requires two AAA batteries to function properly.

Once you put the batteries in, the PWR light will be on to show that the device is working. After about 30 seconds of not using it, the device will turn off automatically to save battery power.

To test the door handle or IMMO signal, simply place the Xhorse VVDI Frequency Tester V2 near the door handle or the ignition coil. When you do this, the IMMO light will start flashing and you will hear a beep sound.

When you bring a remote control near the remote tester, the flashing will immediately stop.

The device can now identify common frequencies.

To test frequencies like 315MHz, 433MHz, 868MHz, and 902MHz, bring a remote close to Tester V2 and press any button.

The corresponding frequency indicator will start flashing shortly after.

To test the IR signal, observe the illumination of the IR light upon receiving the infrared signal.

READ  VVDI2 Transponder Issue on Volvo XC90 2004 AKL

[embedyt] https://www.youtube.com/watch?v=tTFe2Exnl-o[/embedyt]

To know more, please download Xhorse vvdi frequency tester v2 manual:

Be the first to comment

Leave a Reply

Your email address will not be published.


*