How to Choose the Right Milling Cutter for Xhorse Dolphin XP005L: 1.5mm, 2.0mm or 2.5mm

The Xhorse Dolphin XP005L key-cutting machine is a versatile and powerful tool that can cut various types of keys. However, to get the best results, you need to use the right milling cutter for the job. The milling cutter is the part that actually cuts the key, and it comes in different sizes and shapes.

The most common sizes are 1.5mm, 2.0mm, and 2.5mm, but which one should you use?

The answer depends on the type of key you are cutting and the thickness of the blade.

Here are some general guidelines to help you choose the right milling cutter for your Xhorse Dolphin XP005L:

  • 1.5mm milling cutter: This is the smallest and thinnest milling cutter, and it is suitable for cutting high-security keys, such as laser keys, dimple keys, tubular keys, etc. It can also cut some standard keys, but it may take longer and wear out faster than a larger milling cutter.
  • 2.0mm milling cutter: This is the most commonly used milling cutter, and it can cut most standard keys, such as single-sided keys, double-sided keys, flat keys, etc. It can also cut some high-security keys, but it may not be able to cut very deep or narrow grooves.
  • 2.5mm milling cutter: This is the largest and thickest milling cutter, and it is suitable for cutting thick or heavy-duty keys, such as motorcycle keys, car keys, padlock keys, etc. It can also cut some standard keys, but it may not be able to cut very fine or precise details.

To sum up, you should choose the milling cutter that matches the type and thickness of the key you are cutting.

READ  Tutorial on insert Xhorse cutter and probe in key cutting machine

If you are not sure which one to use, you can refer to the user manual or contact Xhorse support for assistance. You should also check the condition of your milling cutter regularly and replace it if it is worn or damaged. By using the right milling cutter for your Xhorse Dolphin XP005L, you can ensure a smooth and accurate key cutting process.

Leave a Reply

Your email address will not be published.


*